Digital DEC VT420 Terminal
DEC VT420
This is a 14 inch diameter terminal with 800x400 pixel, paper white display, can handle up to 38.400 Baud.
I have also a VT330+ terminal ( see here ).
Wikipedia has some info on it here
Some pictures from inside my DEC VT420 from 1994.
(click to view larger version)
Monochrome tube with HV transformer.
(click to view larger version)
Closer look on main pcb. Below the shielded area I suspect the digital part of the device.
(click to view larger version)
Again HV section
(click to view larger version)
And again, now from the top
(click to view larger version)
Other side of main pcb
(click to view larger version)
There is some dust, but not too much.
(click to view larger version)
(click to view larger version)
A Philips tube
(click to view larger version)
Model 32EBY114WRB, date code week 17, 1994
(click to view larger version)
From the left: serial connectors, a standard 25 pin serial connector, power plug.
Connecting the Terminal to a Linux Notebook
You need a real RS232<->USB level converter. Many USB<->RS232 converters create around 5 volts only, and that is not enough for the terminal. It requires a signal compliant to RS232 spec, and this is +12 volts (for a 0) and -12 volts (for a 1). I tried it with a simple one, that failed. Then with a good one ( Digitus USB to serial converter, offers 2 RS232 ports - nice) which fulfills the spec and works with the terminal. I also needed some gender changer, but this may be a problem due to my cables.
(click to view larger version)
The cheap, not working RS232 to USB adapter. It only creates 0 to +5V output voltage on serial linesRS232 to USB adapter.
In the following image, the voltage can be seen (value BY-AY), 4.92 volts only. (click to view larger version)
The Digitus RS232 to USB adapter, fulfilling the RS232 spec, and it even has two outputs and some leds showing activity on the lines.
(click to view larger version)
(click to view larger version)
In the following image the voltage created by this converter can be seen, its value BY-AY and its exactly 12.00 volts. (click to view larger version)
After that, a terminal session can be started from Linux
on the ttyusb port, e.g. on /dev/ttyUSB0
.
There is a little issue with the keys, so there is no ESC key and also other important keys seem to be missing at first.
LK401 - The keyboard of the VT420
To use the VT420, you need to connect a compatible keyboard. The original one was the LK401. I have information on that keyboard on another page.
Further Reading
- Some guy who uses the terminal nowadays BACK TO THE FUTURE: USING A DEC VT220 FROM 1983
- Some other guy who uses the terminal (ok, a VT220, but close) nowadays Integrating a VT220 into my life
- Using the keyboard only and attach it to a linux PC Using a DEC LK401 keyboard in Linux is easy